Caliber 350 stainless steel cyclone steam-water separator, airflow enters, water and oil are thrown to the sides.

Due to fluctuations in raw materials, prices and models may vary. For specific quotations, please contact our sales staff. Thank you.

"Want a practical and efficient steam separator as soon as possible?" Let me share with you: simply put—spin to throw, collide, and settle—handling moisture and impurities effectively. It's not just a filter; it's an "organizer" for airflow: throwing, colliding, and settling in one seamless process.

The steam separator, also known as a gas-water separator or liquid-gas separator, is a filtration device used in gas, steam, and compressed air systems to remove liquid impurities. The cyclone steam separator relies on "centrifugal force"! It spins the airflow at high speed, throwing out water and impurities, leaving behind clean airflow.

YJQS-C Compressed Air Pipeline Gas-Water Separator Filter Instructions

The main air supply pipeline of the steam separator should be equipped with a water collector and drain valve. At the connection point between the supply pipeline and the self-rescue device, a switch and steam separator must be installed. Valves for the compressed air self-rescue system should be fully installed, with valve handles facing the same direction to ensure normal system operation.

At the external connection between the air supply and the self-rescue device, a switch and steam separator must be installed. Valves for the compressed air self-rescue system should be fully installed, with valve handles facing the same direction to ensure normal system operation.

Technical Parameters:

Design Pressure: 1.5 MPa

Pressure Loss: ≤0.002 MPa

Separation Efficiency: 99%

Connection Size: DN15～350

Connection Type: Flange PN1.6/PN2.5/PN4.0

How the Compressed Air Pipeline Gas-Water Separator Filter Works

1. A large volume of moisture-laden gas enters the gas-water separator and undergoes centrifugal downward-sloping motion. Entrained moisture is separated due to reduced velocity. The separated liquid flows out through the drain valve, while dry, clean gas is discharged from the separator outlet. Due to its simple structure, pressure loss is minimized, ensuring clean gas is supplied to the equipment.

Before installation, purge the pipeline with pressurized gas to remove dirt and debris.

2. This separator should be installed at the compressed air pipeline location in coal mines. It is recommended to install shut-off valves before and after the separator.

3. Installation Direction: The arrow on the valve body should align with the fluid direction in the pipeline (the arrow indicates the fluid outlet).

The air spins in a circle, forcing water and oil to be thrown to the sides, flowing down the shell wall, while the airflow continues forward. From the inlet to the outlet, a "cyclone show" helps drive away moisture and impurities.